The YTY is a new generationof All-in-one DC EV charger incorporating 40kW potting charging modules, with an I'm sorry, but it seems that you haven't provided any source text for translation. Please provide the content you would like me to translate, and I'll be happy to assist you! voltage range of DC200-1000V, making it compatible with all vehicle models on the market. It supports various payment methods, including credit card payments, and can be equipped with a cable management device. The system features smart power distribution and charging ccontrol, making it suitable for a wide range of charging scenarios.
I. Installation & Construction
Q: What are the requirements for the installation environment ofa240KW charging pile?
A: Itshouldbe installed in awell-ventilated, dryarea freefrom direct sunlight. Amaintenance space of no less than 720mm (front) and 470mm (sideIt seems that there is no source text provided for translation. Please provide the content you would like to have translated into English.It seems that there is no content provided for translation. Please provide the text you would like to have translated into English, and I will assist you accordingly.mustbe reservedaround the pileto ensure no obstruction of air inlets and outlets. The foundationshouldbe built on compacted original soil or backfilled lime soil, and thermal insulation treatment is required for frozen soil sites.
Q: What is the specification of power supply cable for a240KW charging pile?
A: YJV 3× 240mm²+2× 120mm² copper core cable should be used for power supply cableIt seems that there is no source text provided for translation. Please provide the text you would like to have translated into English.For long-distance transmission, the cable diameter needs to be increased to reduce voltage drop.
Q: How to choose wall-mounted and floor-standinginstallation?
A: Wall-mounted installation is suitable for space-constrained scenarios and requires wall load-bearing capacity. Floor-standing installation needs a cement base to be poured and pre-embedded PVC conduit, which is suitable for outdoor areas or large parking lots.
Q: How to deal with abnormal grounding system?
A: Check whether the ground wire is firmly connected and whether the nutIt seems that the source text you provided is incomplete or missing. Please provide the full text that you would like to have translated into English, and I will assist you accordingly. arerusted. For old residential buildings, a separate "grounding rod" is required for grounding. Regular rust removal and nut tightening are necessary to ensure the grounding resistance meets safety standards.
Q: How to conduct acceptance after installation?
A: Check the cable insulation layer, the tightness of the terminal, the reset function of the emergency stop buttonI'm sorry, but it seems that there is no source text provided for translation. Please provide the text you would like me to translate into English.Conduct a simulated charging test to verify the accuracy of communication and metering and confirm the integrity of waterproof sealsIt seems that there is no source text provided for translation. Please provide the content you would like to have translated into English.
II. Operation & Usage
I'm sorry, but it seems that the source text is incomplete. Could you please provide the full text that you would like to have translated?becheckI'm sorry, but it seems that the source text you provided is incomplete or not visible. Could you please provide the full text that you would like me to translate?before charging?
A: 确认充电枪没有损坏,接口没有异物,车辆已关闭并与充电桩接口类型兼容It seems that you haven't provided any source text for translation. Please provide the content you would like to have translated, and I'll be happy to assist you!Public piles need to be checked for applicable vehicle types (Please provide the text you would like me to translate., old-standard piles may not be able to charge small vehicles).
Q: Can the charging gun be pulled out during charging?
A: It is forbidden! You must first end the charging process through the charging pile operation interface, and pull out the gun only after confirming the gun lock is unlocked to avoid arc damage to the interface.
Q: Can I use charging piles on rainy days?
A: Outdoor pilesmustbe equipped with rain shelters to avoid rainwater infiltrationIt seems that you haven't provided any source text for translation. Please provide the content you would like to have translated into English, and I'll be happy to assist you!Wear insulation gloves when operating, and check whether there is water in the charging gun.
Q: How to deal with the "overload protection" displayedonthe charging pile?
A: Pause charging for 5 minutes andI'm sorry, but it seems that the source text you provided is incomplete or not visible. Could you please provide the full content that you would like to have translated?try after the circuit system restoreIt seems that there is no source text provided for translation. Please provide the text you would like to have translated into English.. Check whether the use of high-power electrical appliances is simultaneous., which may causevoltage instability, and install avoltage stabilizer if necessary.
Q: How to avoidwearof the charging interface?
A: 减少频繁的插拔。在插拔时保持垂直角度。andavoid excessive force; Clean dust from the interface regularly and use special lubricant for maintenance.
III. Troubleshooting & Maintenance
Q: What are the possible reasons for a charging pile failing to start?
It seems that there is no content provided for translation. Please provide the text you would like to have translated into English.I'm sorry, but it seems that the source text you provided is incomplete or not visible. Could you please provide the full text that you would like to have translated?owerfailure(check the air switch and electricity meter balance), accidental activation of the emergency stop button (reset clockwise), or network failure (restart the device or check Wi-Fi/4G signal).
Q: How to troubleshootashutdown during charging?
A: Check whether the connection of the charging gun is loose and confirm the normal operation of the cooling fan.It seems that there is no source text provided for translation. Please provide the text you would like to have translated into English, and I will be happy to assist you.If the shutdown is caused by overheating of the battery or the pile itself, stop using it and contact after-sales service.
Q: What should I do if the charging pile displaysafault code?
A: Look up the meaning of the corresponding code in the equipment manual (e.g., the battery needs to be stopped and tested due to insulation failure)I'm sorry, but it seems that there is no source text provided for translation. Please provide the text you would like me to translate into English.Contact the manufacturer's after-sales service for remote guidance or on-site maintenance.
Q: How to cleanthe housing ofcharging pile?
A: Wipeitwith soft dry cloth every monthandavoid chemical cleanersIt seems that there is no source text provided for translation. Please provide the text you would like to have translated into English.Check whether the seals areThe provided text "ag" does not contain any translatable content. Please provide a longer text or specific content for translation.I'm sorry, but the text you provided appears to be incomplete or not suitable for translation. Please provide a complete and clear text for translation.and replace the waterproof rubber strips in time.
Q: What is the general service life of a charging pile?
A: It can last for 8-10 years under normal useIt seems that there is no source text provided for translation. Please provide the text you would like to have translated into English. Regular professional maintenance (such as capacitor replacement and grounding inspection) can extend the service life to more than 12 years.
IV. Safety and Emergency
Q: How to deal with the leakage ofthecharging pile?
A: Press the emergency stop button immediately,turnTurn off the main power switch, stay away from the equipment, set up warning signs, and call 119 and the after-sales service number.
Q: Can charging be done during thunderstorms?
A: No! Outdoor charging piles must be equipped with lightning protection devices. Cut off the power and stop using the pile during thunderstorms to prevent equipment damage from lightning strikes.
Q: Can sundries be piled around the charging pile?
A: It is forbidden! Keep the area within 1 meter free of flammable materials and clean dust regularly to prevent short circuits and fires.
Q: Can children operatethecharging pile?
It seems that the source text you provided is incomplete. Please provide the full content you would like to have translated into English.NO! Warning signsmustbe set, and parents should supervise to avoid touching the charging interface.
Q: How to make an emergency plan for charging piles?
A: Clarify the handling procedures for electric leakage, fire, and equipment failure. Assign responsible people and conduct regular drills. Equip emergency supplies such as fire extinguishers and insulating gloves.
